Techniques

GreenStyle Open Back Pullover

Do you ever look at patterns and think, I really like that, except for…? That’s how I felt about the GreenStyle Open Back Pullover. I like the open back, I like that there’s a deeper scooped back, as well as a closed back option. I like that it can be sleeveless, or have long or short sleeves. I like that there is a crew neck, as well as a scoop neck, along with a hood option. Most people love “hoodies” and banded sweatshirts. I am not one of those people.

Banded bottom shirts are not a good look on me. I own one banded bottom shirt, and it hangs unworn in my closet. I’ve tried to wear it, it looked cute on the hanger when I bought it years ago, but on me, it looks like a maternity top. If I were an expectant Mama I would wear it and look adorable. But since I am a Grandma and long past the age of having babies, it’s just not the look I am going for!

Luckily, it is super easy to hack the Open Back Pullover to not need a band. You are going to want to pay attention to your hip measurement. Make sure you measure the widest/largest part of your hips and booty. If it falls within the measurements for the size you are making, you’re good to go. But if it’s at the upper end or bigger than the size for your bust and waist, you will want to grade your pattern out to a larger size, starting at the waist. Then use a ruler to add 4″ of length at the bottom of the front and back pattern pieces.

Follow the pattern tutorial, (it’s a pretty easy pattern) and instead of sewing on a band at the bottom, simply pin and press the hem up 3/4″ and zigzag or coverstitch to finish the hem.

I like that I can wear a regular bra with the high scoop back, and wear it like any other top. The low scoop back would really show off a cute Power Sports Bra and be fun for yoga class or working out. I thought about using powernet in the scoop opening, (there is a pattern piece for that), but the open back is just the right amount of sexy. It would also be fun to use powernet as the upper back pattern piece for an even airier feel.

I made my top out of Circular Knit, and would totally consider a long sleeved, closed back version in Rayon Spandex or Ribbing for cooler days. If you’re looking for a more traditional hoodie feel, Cozy French Terry would be so soft and plush! Supplex would give a more athletic feel, and would coordinate nicely with Super G’s or Stride Athletic Tights. I’m glad I gave the Open Back Pullover a shot. It’s a simple, slightly sexy 😉 , comfortable look.

My shorts are the Brassie Joggers, made out of Supplex. I purchased all my fabric from Phee Fabrics.

This post may contain affiliate links. This means that at no extra cost to you, I may receive a small commission/credit if you purchase through my links. As always, I only give my honest opinion. After all, my blogpost represents me! 🙂 Thank you for reading and sharing my love of sewing, patterns, awesome fabric, and pattern hacking. ❤

October 3, 2019October 9, 2019 by sewbeachlife Categories: Activewear, Rayon Spandex, Supplex, Tanks, Techniques, Women's Tops, workout wearTags: Circular Knit, greenstyle, openback, pattern hacks, Powernet, Rayon Spandex, style, Supplex, Women's Tops, workout Leave a comment

Titania Tunic Workout Top Hack: From Dressy Tunic To Workout Ready

Whenever I make a cute top, I can’t help but think about how I could make it into a cute workout top! The Stitch Upon A Time Titania Top & Tunic was the perfect base for a workout top hack. Since dresses are a year round staple for me, it’s also going to end up as a dress once I add 8 or 9 inches to the tunic length. The tunic itself turned out quite cute. I like the flowy body, especially in this silky soft circular knit. It has the perfect drape for this pattern. Can you imagine the twirl in a dress length?

Can you see my elastic error in these photos? Instead of following the elastic length cut chart for the armscye, I thought the elastic should be more taught. Making it 2 inches shorter than recommended gave me puckering and a bit of rolling at the armpits. I should know by now to trust Jennifer of Stitch Upon A Time’s design and testing and use the recommended length! The neckband was easy to sew, and despite being a higher neckline than I normally wear, the rounded shape doesn’t cut into my neck or shoulders. Using the built in shelf bra means not having to worry about wearing a strapless bra, or trying to find a bra with straps that don’t show. The stylish tunic would look great with skinny jeans or fitted pants like the Goldilegs Jeans, and of course with a slim skirt or shorts.

Hacking the shelf bra pieces into a workout top is easier than you think. Cut two bra fronts out of Supplex. Rather than cutting the back out on the fold of the fabric, I folded my pattern piece under 5/8″ from the center back, and cut out two left back and two right back pieces. You’ll also cut a bra front and a right and left back out of powernet or techsheen for support. For design purposes, I wanted the bra back to have a 2″ strip of powernet down the center, with a little opening between the bra top and the tank body. I used my favorite tank pattern to make the bodice. If you don’t have a tank pattern, trace any well fitting tank in your closet. Don’t forget to add seam allowances!

The trickiest part of this workout top is the V-cutout on the center front. Lay your clear ruler on an angle, starting 1″ from center front at the top, and down 5-1/2″. Do the same thing to the second bra front piece, then trim the 3/8″ seam allowance off the second triangle cutout opening. The trimmed version will become your front lining piece.

Lay the triangle you cut out of the bra front on your powernet. Add 3/4″ width to each of the long sides of the triangle as seam allowances. This gives you the front triangle insert. Cut a rectangular piece of powernet 2-3/4″ wide, by 2″ shorter than the length of your bra back at center back. This gives you the back insert.

Baste your powernet/techsheen bra front and backs to the wrong side of your bra lining front and back pieces. You will treat them as one layer from this point on. Right sides facing, sew one long side of your triangle insert to the cutout section of your bra front, using a 3/8″ seam allowance. Snip the center front of the bra down to, but not through the stitching line. And here’s where I’m going to make it easy to get a perfect V. With your bra top right side up on a flat surface, fold the seam allowance of the unstitched side of the opening under 3/8″. Apply Washaway Wonder Tape to the seam allowance. Making sure that your powernet insert triangle is laying smooth and flat, peel off the backing paper and press the folded under edge of your opening onto the powernet. You can baste that side into place, or just trust the Wonder Tape to do it’s job. (Although I am a big believer in basting, I trusted the Wonder Tape and it held fine until I was ready to topstitch all my layers.)

Right sides together, and lined up at the top edge, sew the rectangular powernet insert to one side of the bra back. Line the insert up with the top of other side of the bra back and stitch, using 3/8″ seam allowances.

Sew the front and back bra pieces together at the side seams. Sew the lining front and back bra pieces together at the side seams. Note: the pattern calls for 1/2″ seam allowances, so be sure to use this seam allowance on the side seams, even though I use 3/8″ seam allowances on the rest of this hack. Fold the center back edges of the bra lining under 3/8″ and baste.

With the bra right side out, and the lining wrong side out, place the bra lining over the bra. Line up the neck and arm openings, and pin in place. With right sides together, stitch along the armscyes and add the elastic in the seam allowances as per the pattern tutorial. Stitch the front and back necklines leaving openings at the shoulders to add straps. Cut two pieces of bra strapping 6″ long. Slide a strap down inside each shoulder opening at the back, and with the end of the strap flush with the opening, stitch the straps in place. You may want to go over the stitch line twice to ensure that the straps are secure. Turn the bra right side out. Ensuring that the triangle insert and cutout opening are properly aligned, top stitch around the triangle.

Lining up the edges of the back and back lining so that they are even with the rectangle insert, top stitch along the edges.

Now you can try on the bra, and adjust the length of the straps to fit. You may end up cutting a couple of inches off, but you need long enough peices to work with! Slide the ends of the straps down into the openings at the front shoulders, turn the top wrong sides out, and stitch the straps in place at the front shoulders.

Sew your tank front and back bodice pieces together. Then slide the bra down inside the tank with right sides together, and matching center points on the front and back, stitch. Using the measurement in the cut chart, wrap a piece of elastic around your underbust to check for fit. I used 1-1/4″ wide sport elastic, rather than the recommended width. Use whatever width of elastic that works for you, or that you happen to have on hand. The elastic should fit snugly, but not uncomfortably. Overlap the ends and stitch together. Mark quarter points on your elastic, and at the seam allowance, and pin together at those 4 points. Stretching the elastic to fit, zig zag it in place. Turn the hem of your workout top under 3/4″ and use a zig zag, twin needle or coverstitch machine to finish.

Smile, and go for a walk or run, or hit the gym or yoga studio in your fun new workout top!

I bought all of my fabric, the Circular Knit, Supplex, Powernet, and Techsheen from Phee Fabrics, along with the clear elastic and bra strapping. The consistently high quality makes and keeps me a repeat shopper! This post may contain affiliate links. This means that at no extra cost to you, I may earn a small credit toward buying more fabulous Phee Fabric if you purchase through my links. ❤ As always, I only give my honest opinion because my posts represent me.

August 3, 2019August 23, 2019 by sewbeachlife Categories: Activewear, Fabric Types, Tanks, Techniques, Women's Tops, workout wearTags: Hacking, hacks, stitch upon a time, style, Supplex, workout Leave a comment

Stitch Upon A Time Water Faery Twist & Swim Top

Summer has arrived, so it’s about time for me to get started on sewing up some swimwear! When the Stitch Upon A Time Water Faery swim patterns were released, I eyed them closely, but put off buying a pattern because I couldn’t decide which one to buy. The Retro One Piece has a dress option, which I love the look of! But I never wear one piece swimsuits. I finally settled on the Twist & Swim Top because I knew I would wear the sexy yet modest top and could play around with the pattern.

The swim top has the option of a plain or twisted front. Since I was making the fun twisted front, I decided to follow the pattern exactly for my first version to see how it fit. I made my measured size, using the green extended cut line for the bodice, since I have the noted 4.5″+ difference between bust and under bust, and followed the tutorial. As I’ve come to expect from Stitch Upon A Time Patterns, the tutorial is well written, with lots of photos to help you visualize each step. The elastic measurements are perfect, exactly the right length for support and comfort.

I had some swim fabric from JoAnn’s in my stash that was left over from a project I made last year. There wasn’t quite enough fabric to make the straps the recommended width, so I made them as wide as possible, but had to omit the gathering on the straps. As experience has taught me when making bras or tops that need support, I used powernet in the front and back bodice pieces, as well as the straps. The resulting top is cute, and works great for walks on the beach, but had one small problem.

Knowing that my shoulder to bust apex measurement is longer than average, I should have taken that into account and lengthened the straps. Since the straps are too short for my body, the top cuts into my armpits a bit. Because the top is held firmly in place under the bust in front, the back is pulled forward and up, which keeps the back from laying properly. Fortunately, it’s a simple fix.

I just added an inch to the strap length before cutting out my next version. This time I used Tricot from Phee Fabrics. I think the hardest part was narrowing down which colors to use, since it’s available in so many pretty colors! Because I liked the way the narrower straps turned out, I decided to cut them at 3.5″ wide again. I also decided to play around with the bottom band construction, to use one piece of 1.25″ wide elastic in the band, rather than elastic at the top and bottom seams of the band.

I made the top as directed until I got to the band. I sewed the bands right sides together, along the bottom edge. I marked the band at the midpoint, then marked the quarter point by folding one end over and 1/2″ past the center pin, to account for the 1/2″ seam allowance. I also placed pins on either side of my center front pin to mark the V placement. I stitched between the two outer pins, using a 3/8″ seam allowance. (Note: I used a 3/8″ seam allowance on the top and bottom seams of my band so that I could use 1.25″ sport elastic. You can also stick to the 1/2″ seam allowance and use 1″ wide elastic.)

Then I carefully cut down to, but not through the stitching at both ends of this V stitching, and turned the band right sides out. Because I would need an opening to thread my elastic through the band after I attached it to the bodice, I had to carefully plan out stitching the short ends together. Placing the short ends right sides together, I stitched from one side for 1/2″. Then I stitched from the other side to just past the bottom seam. This left me enough opening to thread my elastic through, but ensured that the side seam was completely sewn on the outer side.

I turned the band right side out and basted the long edges together. When sewing the band and bodice together, make sure that the opening for the elastic ends up on the inside of your top!

Then I matched up the center front, center back, and the quarter points of the band and bodice, right sides together. Keep in mind that the quarter points may not exactly line up with the side seams, especially when you use the extended bodice cut lines. Stitch the band and bodice together and insert the elastic. Use the recommended underbust elastic length, and overlap and stitch the ends of the elastic together. You can stitch the opening on the inside of the band closed if you want, but since tricot doesn’t fray, I didn’t bother.

Yay! I had a perfectly fitting swim top! Now for some bottoms. I’ve owned the Scrundlewear 2.0 pattern for months, but had never made a pair. Since everybody seems to love Scrundies, I figured they would make great swim bottoms. I cut on the foldover waistband line, tapering in at the top following the side seam cutline to give me a high waisted look. The front height was great, but the back was too high. I tapered from 1-5/8″ down at center back over to the height of the front side seam.

The legs felt too low, so while wearing the bottom, I carefully pinned where I wanted the leg line to end. I added in the 3/8″ seam allowance I was going to use for turning my swim elastic under, marked my pattern, and cut off the excess fabric. The photo below shows how much fabric I cut off compared to my new higher leg cut line.

I also cut a front and back out of swim lining. And as you can see, the swim lining from Phee Fabrics is nothing like the stuff I’ve bought from JoAnn’s. It’s soft and lays smoothly. The edges don’t curl up, and it’s super easy to sew with! I also cut a front piece out of powernet. Hello tummy control! Not only is powernet great for bras and swim tops, it works fabulously to smooth out the tummy and hold everything in place. Baste the powernet to the fabric front, and sew the front and back together at the side and bottom seams. Sew the swim lining front and back together as well. Place the swim lining layer inside the fabric layer wrong sides together, and baste at the leg and waist openings. Using a zig zag stitch, sew the elastic on the inside of the leg openings with the elastic lined up with the edge of the fabric. Turn the fabric under and top stitch using a zig zag with the stitch length set to 2.5, and the stitch width set to 3.0. This will give you a professional, even finish.

I used a strip of 2″ wide fabric to make my waistband. I sewed the two short ends right sides together, then layered the swim bottoms and waistband, right sides together, with 3/4″ knit elastic on top. I stitched through all three layers, using a 1/4″ seam allowance. This was easier than anticipated, since all three layers were the same length. I didn’t have to worry about stretching or pulling. I flipped the waistband open, and carefully folded the waistband fabric around to the inside and pinned it in place. Using the same zig zag settings, I topstitched the fabric in place just below the waistband.

My Scrundie swim bottoms were a success, and I have a cute new swimsuit! I love that it’s modest enough, while still being sexy. My husband definitely approves of my creation!

Since I seem to think that every bra or swim top can be made into a workout top, read the 5oo4 Escapade Experiment, Hack At It, and the GreenStyle Power Sports Bra Workout Top Hack as proof of my workout top obsession! 🙂 I decided to make the Water Faery Twist Top into a workout top too. I made the Twist & Swim Top out of Tricot, per directions (with the narrower and longer straps out of Supplex) through to basting the completed bodice layers together along the bottom. Then I got to work on the tank portion. Supplex is my absolute favorite fabric for workout wear, so that’s what I used for the tank. The pattern includes a tankini option, but since I was making a workout top rather than a swim top, I didn’t want the negative ease that the swim top has (to keep the tank from floating up while in the water).

If you have a well fitting tank pattern, you can use that, or you can just trace the tankini piece wider, with a gentle slope down to the bottom, rather than with the inwardly shaped waist curve of the original. I thought it would be fun to color block a stripe down the center back, and add some pockets to the front for practicality and a pop of color. I cut a strip of tricot 4.5″ wide by the length of the center back tank piece. Then I folded my tank pattern piece in 1.5″ at the center back. That way, when I cut out the two back halves (not on the fold), I would be missing 3″ from the center back. Sewing the strip to each of the back pieces right sides together, with a 3/8″ seam allowance meant that the color-blocked back ended up the same size as my tank pattern piece.
I cut out two 4-3/4″ x 7-1/2″ rectangles for my front pockets. I wanted them to be hidden seam pockets like the one I did on the GreenStyle Jillian Tank. I laid the pocket pieces on the tank front and marked the 3/8″ seam line at the top and bottom of the pocket with a pin. I flipped the pocket toward the center, and with right sides together, pinned the pocket to the tank, then stitched 3/8″ in from the pocket edge.

I flipped the pockets back to the outside edges after stitching and basted them in place.

At this point, I should have been able to sew the tank front and back together, and sewn the bodice to the tank. But I had made a couple of rookie errors. 😦 The first was that I had made the tank too wide at the top. This was easily remedied by angling the tank in at the top so that it was the same width as the bodice (and the original tankini pattern piece.) The second error was not considering the fact that I am tall, and should have added an inch to the length of the tank. The problem was remedied easily enough by adding a band. I cut out the band pieces, and sewed them onto the bodice per the pattern tutorial, except using a 3/8″ seam allowance, and spacing my bodice front center V only 1/2″ apart. I don’t want to show too much skin at yoga class!

Because the 1.25″ wide sport elastic had worked so well on my swim top, I decided to use it for my workout top as well. With the bands still folded up on the bodice, I used pins to mark the quarter points on the top, and a pencil to mark the quarter points on the elastic, and stretching to fit, stitched the elastic to the seam allowance. I had the elastic lined up with the stitching line, and hanging down below the bodice. Then I folded the inner band down, and stitched the elastic to the band.

I brought the outer band down and basted it in place before attaching the tank portion. I sewed on the tank, hemmed the bottom, and I’ve got a cute new workout top!

Everything stayed perfectly in place during a sweaty Vinyassa Flow class that included inversions. Everyone in the lobby when I walked into the yoga studio commented on my top. None of them could believe that I made it, including the instructor, who knows how to sew. I went for a walk later in the evening, and the pockets worked great to hold my phone and house key. It looks like I’ve got a great new swimwear and workout top pattern to add into my rotation!

*This post may contain affiliate links. This means that at no extra cost to you, I may receive a small commission if you purchase through my links. Because I value honesty and integrity, I only recommend products that I love and personally use for my makes. Thank you for reading and sharing my blogpost, and love of sewing, patterns, pattern hacking, and high quality fabrics! 🙂

June 15, 2019 by sewbeachlife Categories: Fabric Types, Swimwear, Tanks, Techniques, workout wearTags: Hacking, hacks, Swim lining, Swimsuit, Swimwear, Tricot, tutorial, workout Leave a comment

GreenStyle Jillian Tank

I love sewing workout wear for several reasons. First of all, I need something to wear to yoga class. Secondly, I am far too frugal to spend $50 or more on a cute workout top. And last but not least, I can customize my makes to suit my style and color preferences.

I have had the vision of a white workout top with powernet inserts floating around in my head for a while. I just hadn’t gotten around to sewing one up. Enter the GreenStyle Jillian Tank (on sale for 15% off as a May 2019 “Pattern of the Month”). 🙂 The pattern is loaded with options: a bandeau top; an inner tank, with or without a built in sports bra; and an outer tank that can be made with knit or woven fabric (Hello Stretch Twill!) I made the inner tank with a built in sports bra, but now I need to order some Stretch Twill and sew up the outer tank!

I used white Supplex and white Powernet from Phee Fabrics to make my Jillian Tank. Let’s be honest, I pretty much use Supplex and Powernet for ALL of my workout wear. Oh, occasionally I’ll throw in some Tricot or Circular Knit, but Supplex and Powernet are definitely staples in my workout wear fabric stash.

I like the simple design of the Jillian inner tank, because it gives the powernet inserts the opportunity to stand out. Adding inserts is really easy, it’s basically a simple color blocking technique. I cut two right angle triangles out of my powernet, being sure to cut them straight on the grain, with the greatest stretch going side to side. The sides of the L part of the triangles were 7″ long. I laid the triangles on the bottom corner of the tank front, and trimmed off the excess powernet to match the shape of the corners.

Jillian triangle

I marked the tank front 6.25″ up and 6.25″ over from the bottom corner and using my quilting ruler and rotary cutter, cut off the (smaller sized) triangles from the bottom corners of my tank front. Then I laid the powernet triangles on the tank front right sides together and stitched them together. I pressed the seam allowances toward the Supplex and top-stitched them in place so that you wouldn’t see them through the powernet.

Jillian power

I like to walk the beach whenever I get the chance. Since I don’t want to have to carry my phone and keys, I need pockets. I put pockets in all my workout tights and shorts, but occasionally, I’ll find myself wearing something without pockets. So why not start adding pockets to my workout tops? A hidden seam pocket gives cleaner lines than a patch pocket, not to mention how much easier it is to keep straight while sewing!

I cut a 4.5″ wide by 8″ tall rectangle out of powernet. I made it that large to ensure that my phone would stay snugly in place, yet still be able to reach in and grab a key or lip balm from the bottom of the pocket. I folded the top of the pocket down and stitched it in place. Then I laid the pocket right sides together 3.75″ from the right edge of the tank back at the bottom corner. I stitched along the right hand side of the pocket.

Jillian pock 1

Then I flipped the pocket over and basted it along the side seam, and zig-zagged it in place along the bottom of the pocket. (Had I cut the pocket a bit longer, I would have lined it up with the bottom of the tank and just basted it in place.) When the tank is hemmed, the bottom of the pocket is securely sewn in place.

Jillian pock 2

After these simple modifications, I just followed the pattern tutorial to complete my tank. I made another small adjustment to the pattern out of necessity. The pattern calls for double straps threaded through the top of the front shoulder strap. Rather than cutting and sewing the straps, I used plush bra strap elastic to speed up my sewing time. Since my strapping was wider than the sewn straps would have been, I went with a single strap.

Jillian back

I love having a solid white workout top to mix and match with my Super G‘s. The powernet inserts and pocket give the simple lines a little extra pizazz.

Jillian G front Jillian G side

I can style it with a skirt or shorts for a completely different look.

Jillian hand

I could see myself using this simple color-blocking technique to add in coordinating fabrics if I were trying to match workout tights with color-blocked side panels. The hidden seam pocket can be customized to fit whatever you want to carry. It’s so much more useful than the tiny little key pockets you find on ready to wear!

Go ahead and sew all the workout wear! After all, it is #memademay.

*This post may contain affiliate links. This means that at no extra cost to you, I may receive a small commission if you purchase through my links. As always, I only give my honest opinion because my posts represent me. Thank you for reading and sharing my love of sewing, pattern hacking, and Phee Fabrics!

May 2, 2019 by sewbeachlife Categories: Tanks, Techniques, Women's TopsTags: Hacking, hacks, pockets, Powernet, style, Supplex, Techniques, tips, workout Leave a comment

Crop Hoodie

Hello! I’m Caitlin and this is my first time writing for Phee. I am super excited to be here. 🙂 You can catch my ramblings, I mean blog, over at Luna & Laika. Today, I am going to tell you how I created this crop hoodie that I have had sitting in my sewing inspirations on my Pinterest page since… January!!!

You ready? I am! Here are the inspiration photos:

The first pin is here and website here. The second pin is here and website here.

When I saw this top, I immediately thought of the Studio to Street top that had just released at the time by Greenstyle Creations. Next, I was on the hunt for the perfect fabric. I knew I wanted the main fabric to be lightweight and the “mesh” part to provide some coverage but still have the see through look to it.

I ordered some Phee Powernet in white to test out and knew immediately upon opening the package that it was exactly what I was going for. I also received some of their amazing rayon spandex in the package… but unfortunately white was not in stock at the time… so the project was put on hold.

When Melissa announced the white rayon spandex was restocking and there was a preorder for it, I ordered right away, knowing that was what I needed for the rest of the crop hoodie… and waited for it to be stocked and on it’s way. Are you getting why this project has taken so long? 🙂 Alright, let’s jump ahead…

I knew I needed to make two modifications to the pattern: color blocking the front and back bodice piece, and adding cuffs to the sleeves. I also needed the hood add on . I went with the crop length (my first ever crop top since I danced in high school!) to mimic the inspiration.

When I color block something simple like a bodice, I simply fold where I want the color block to be. When I cut, I add the seam allowance on each side. This is easier for me instead of creating a new pattern piece, unless I know for sure I’ll be making multiple items like this.

I cut the top of the bodice pieces in the power net, and everything else in the rayon spandex. For the drawstring, I cut about 1-1.5″ off the edge of my fabric. I usually don’t measure the length, but for anything for me I try to run it the longest edge of the fabric, knowing I can always cut off excess after the hood is assembled. Below are all of the pieces.

Sewing these fabrics was a breeze. The Powernet is a tad slippery, but I made sure to keep it on top when using my serger so I could make sure that it wasn’t slipping. All of the seams where the Powernet was sewn to the Rayon Spandex I made sure to topstitch the seam toward the Rayon Spandex so it stayed hidden. This helped clean the edges and adds a great detail to the finished item.

I decided to actually sew and turn my drawstring for this top. Honestly, I’m usually lazy and just use the curled edge of the fabric, but I wanted to step things up with this top. 🙂

The pattern was a breeze to sew up. The fabrics were a breeze to sew up. I am SO happy with the finished product! I still cannot believe that my sewing inspiration came to life! I am so excited to rock this top this spring. Of course it looks great with my Strides and Power Sports Bra made with Phee’s Peacock Supplex.

Now you have all the steps to make your own crop hoodie! If I were to make any changes, the only change I would do would be to have the front color block section be more rounded like in the inspiration photos. I’m sure I will need one of these in black for the fall, so that will be my plan! As always, let me know if you have any questions or comments! Thanks for reading. 🙂

Cheers!
Caitlin

White Rayon Spandex found here.

White Powernet found here.

Studio to Street found here.

Hood add on found here.

*Some of the links above may be affiliate links. Thank you for your support!*

April 7, 2019April 7, 2019 by Luna & Laika Categories: Techniques, Women's TopsTags: greenstyle, Hack, Powernet, Rayon Spandex, Women's Tops 1 Comment

Pace Skirt & Tips For Making Pretty Pleats

Like many (most?) sewists, I like looking through patterns, and thinking about new clothing I can add to my wardrobe. I have eyed the GreenStyle Pace Skirt several times, and even when I’ve made bulk pattern purchases to get the discount, I’ve hesitated on the Pace Skirt because of the pleats. Pleats may seem intimidating, but you really can sew pretty pleats! I want to share some tips for making pleats, so you won’t be afraid to try this fun pattern. *Bonus! the Pace Skirt pattern is on sale for $8.50 during the month of April!* But you should probably click on the link and buy it now, before you forget. (says someone who has forgotten until the day after a sale :-()

The Pace Skirt has a plain front and pleated back, with optional attached briefs, or shorts with pockets! 🙂 Secret hidden pockets to carry your keys and phone? Not having to worry that a big gust of wind will come along, or that you’ll have to perform some kind of quick un-lady-like move while chasing a little one around? Sign me up please!

The pattern is drafted for a stretch woven skirt, with a stretch knit waistband and briefs/shorts. Since I always have some awesome Phee fabric on hand, and GreenStyle has a note in the directions that you can use a stretch knit by sizing the skirt portion down a size, I knew that was the way to go! I have learned to trust the extensive testing and excellent pattern drafting, follow my measurements, and make the recommended sizes. I like to print and tape a master copy of my patterns and trace out my size on waxed paper. That way I’ve always got my master pattern to go back to, even if my pattern pieces get torn or a bit crinkled up from use.

So here is my first tip: pay attention when you are tracing your pattern pieces. Because I was using a stretch knit, I had to remember to trace a smaller size for the skirt front, back, and upper back pieces, while using my measured size for the waistband and shorts pieces. This is also the time to lengthen or shorten the pattern pieces as needed. I am tall, so I added 1-3/8″ to the skirt length. I also used the high rise waistband pieces rather than the standard pieces. Can I just add here that I love that both rises are included in the pattern? I didn’t have to worry about adjusting the pattern to add to the rise, and those that prefer a shorter rise also have the appropriate pattern pieces.

Tip #2: Make sure that you are laying out your pattern perfectly on the grain. Grainlines and direction of greatest stretch lines are included on patterns for a very important reason. They help you line up the pattern with the fabric so that your garment will hang properly on the body. This is super important on the skirt back piece, because you will want to reference the grainline when pressing your pleats. If you cut it out on grain, it will make it so much easier to get perfect pleats. If you cut it out crooked, you will get crooked pleats if you follow the grainline while pressing.

Tip #3: Mark the pleat lines on the skirt back. The pattern piece is clearly marked with how to fold your pleats, so they go from the center outwards. You could use tracing paper or a disappearing pen, but I found it easy enough to use pins and clips. I placed pins along the top of the skirt at the pleat marks. And where each pleat folded over, and the next pleat started, I also added a clip. That was my reminder of where the pleat ended. In the photo below, I’ve already pressed all the pleats on the right outward toward the right side of the skirt. (I used the metal hem guides to help hold my pleats in place while I made the folds to pleat the other half of the skirt back. You could also just use pins or clips to accomplish this.) Since I had made sure that I cut my pattern piece on the grainline, it was easy to follow the grainline to press the entire length of the pleat down to the hemline. And obviously, I need to clean my iron, because little white specks of build-up have flaked out of the steam ports! 🙂

pace pinned

Tip #4: When pattern directions suggest that you baste, take the time to baste! The small amount of time that it takes to baste, will save you so much more time when you are sewing your pieces together. Once all of your pleats are pressed, pin them in place so that you can baste them down before sewing on the upper back piece. Check out those pretty, pressed pleats!

pace pleats

By following the pattern directions, you will end up with a fun, flirty, pleated skirt! It can be casual everyday wear when paired with a simple tank top. In this case, a rayon spandex GreenStyle Staple Tank.

pace side pace back

You can use the built-in briefs option if you prefer it when playing tennis or golf. If you’re like me and want pockets to hold your stuff while power-walking, I recommend the shorts. I love the “secret” pockets!

pace pocket

I also love that you can change the vibe and wear the Pace Skirt for different occasions by wearing a dressier top, or adding a jacket or cardigan. This RTW top had been languishing in my closet because I didn’t really have anything to wear it with.

pace black

I am very happy with my new skirt. My husband complimented me on it, and said that he loves the pleats. ❤ Even with the built-in shorts, I don’t feel overheated because I used Phee Fabrics circular knit which is moisture-wicking and super comfortable. There’s no need to feel intimidated by pleats. If you have any questions about sewing or pleats, feel free to comment and I will try to help you out. Take your time, use my tips, follow the pattern directions, and add some cute new skirts to your closet!

*This post may contain affiliate links. This means that at no extra cost to you, I may receive a small commission if you purchase through my links. As always, I only give my honest opinion. After all, my blog posts represent me! Thank you for reading and supporting my love of sewing!

April 1, 2019April 1, 2019 by sewbeachlife Categories: Skirts, Techniques, UncategorizedTags: pleats, style, Techniques, tips 4 Comments

Share this:

Related