Bras: When a RTW “Good Enough” Fit isn’t Anymore

If you have seen any of my sewing posts or makes I am well known having large natural breasts and with a full bust of 44.5″ to 47″ (depending on the support of the bra I am wearing at the time) and an under bust of 34.5″ I find it extremely hard to go bra shopping and find something that fits “OK”. I usually find myself purchasing a 38H or a 40H in the Cacique line through Lane Bryant and I feel socially acceptable meaning I am supported enough to not feel like a broken-down milk cow. In reality, I pop out of the top of a 38H when I bend over and the 40H is too big in the band so it shifts up in the back as well as the underwires fall to the side/back of my rib cage leaving uncomfortable rub spots.

I have been stalking the bra making forums and bra making pattern designers for almost a year now but there is A LOT of information out there! I have read articles and excerpts on how to draft a bra pattern based on measurements but with 2 small children and running the family commercial print company there is not a lot of time to wrap my head around a project like that. Then Melissa of Phee Fabrics says, “Hey, I am stocking bra kits, foam and underwires!” My first thought was … Shiiit, I’m really going to have to do this …

After many people with larger cup sizes recommended a designer I went ahead and messaged Orange Lingerie on Facebook. She was extremely helpful in pointing me to the right direction based on my measurements and what I needed in a bra: support and variety. At this point in my life the last PRETTY bra I was able to own was when I could squeeze into a 36F from Frederick’s of Hollywood! So I purchased the Orange Lingerie Boylston with a recommended size of 36J.

BoylstonRd-1

I was thinking I would just take you from pattern purchase to the grand finale but after having my hands on all of the different fabrics – some of which were entirely new to me in my over 25 years of sewing – I thought I would take you through this journey to perfecting MY bra in hopes you will join me!

BoylstonRd-6

From the top, clockwise, we have the poly-laminate foam, white Techsheen and white 40 denier Tricot. I could go on and on about these but the Phee website has already listed all the important info on the website. I will, however, point out that the foam is chlorine-safe! Meaning if you need/want custom swim cups this is PERFECT!

Before you really dive in to sewing your bra I would recommend sewing some test scraps with these fabrics and make notes, especially if you are new to them. By writing the stitch lengths, widths and tensions on the scraps, I will be able to toss these into my sewing bag for future reference.

The Boylston is not originally written for foam but it was was easy to convert using Cloth Habit’s series to make a foam cup bra from an existing pattern.

BoylstonRd-10

An extra item I used on this first round was double galloon lace as I followed the instructions from Orange Lingerie to make a lace upper cup based on an existing pattern. Something to remember that DOES NOT come in the bra kits are the underwires (refer to your pattern for the correct size and shape) and underwire casing – don’t ask me how I know *wink*. If you forget these items, you will neeeed to place another Phee order – OH DARN! Here’s the inside view and as a first go-round with a real bra I am beyond pleased!

I have a few fit issues I need to work out. I feel the cup seams all meet at the right place over my nipples but once all of the breast tissue is in the cup I have a little extra over flow in the upper cup. I think I want to find a way to add more upper cup coverage and to see about what solutions there are to prevent slipping of the shoulder straps whether that is strap placement or addition of silicone. I know the slippage is due to having such developed neck/shoulder muscles from carrying so much breast weight over the years.

I am ecstatic that after one trial run I have a wearable muslin and the enthusiasm to try again (and again) with some adjustments. I already have dreams of all the pretty, custom-fitting bras I will have in my rotation instead of literally only 2 real, poor-fitting bras I wash repetitively. Here are my plans for a glorious pairing of Phee gorgeousness … the amethyst bra findings kit (don’t forget to add the amethyst underwire casing) and coral power net!BoylstonRd-11

I hope you will join me as I continue on this crazy, scary, exciting bra making journey!!!

Please note affiliate links may be used where I earn commissions. You know it is reinvested in ALL fabrics! :o)

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s